- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
Views: 2 Author: Site Editor Publish Time: 2026-03-09 Origin: Site
When it comes to field installations demanding reliable signal transmission and exceptional environmental durability, the High Quality OCT200 Coaxial Cable emerges as the definitive solution for wireless communications systems, antenna feeder runs, and critical infrastructure projects. This premium MIL-C-17 compliant cable delivers consistent 50-ohm impedance performance while offering the flexibility and robustness that field technicians require for successful installations across diverse environmental conditions.
Modern field setups need wires that can keep the integrity of the signal even in tough situations and offer reliable electrical performance. The OCT200 coaxial wire meets these needs thanks to its carefully thought-out specs and strong building methods.
While providing excellent signal clarity, the cable works with an exact 50-ohm impedance characteristic that stays the same across its working frequency range. Its 84% transmission rate ensures very little signal delay, making it perfect for communication needs that need to be done quickly. The capacitance value of 80.1 pF/m gives stable electrical properties that stay the same even when temperature changes and the environment is stressed.
Return loss performance greater than 20 dB shows that the wire can reduce signal reflections, which directly leads to higher system efficiency and lower power needs. This standard is especially important for sites in the field, where signal strength optimization is needed to keep communication lines open over long distances.
The cable has two conductors, and the inner wire can be either bare copper or copper-clad aluminum. This gives the cable great conductivity while keeping the cost low enough for large-scale uses. The foam polyethylene insulator is better at insulates while also making the wire lighter, which makes installation in the field easier.
Aluminum tape serves as the first shield in the dual-shielding design, and tin-copper braid serves as the second shield. This setup offers great protection against electromagnetic interference, keeping signals strong in places with a lot of electrical noise, like factories and cities where field installations are popular.
The cable is safer than what is required by industry standards for field placement because it can handle 1200 volts DC and 3100 volts RMS for jacket spark tests. These grades give a lot of safety room, which keeps both the equipment and the people who work on it safe during installation and use.
Knowing how the OCT200 Coaxial Cable compares to other options helps procurement workers make smart choices that meet performance needs while staying within price limits.
Even though they are still widely used, traditional RG-series cables have a lot more signal loss than current low-loss designs. The foam dielectric inside the OCT200 wire lowers signal loss by about 30–40% compared to solid plastic options. This lets signals travel farther without having to be amplified. The cable is the same as LMR200, so it can be used directly in places that use older cable types. It also has better environmental stability and installation freedom. This flexibility makes upgrades easier and cuts down on the need to change connectors or make changes to the system.
Even though premium connections cost more at first, the OCT200 usually has a lower total cost of ownership because it lasts longer and needs less upkeep. The environmental protection of the wire lowers the number of times it needs to be replaced, and its excellent electrical performance lowers the need for signal conditioning equipment. The flexible and field-friendly form of the cable makes installation faster and cheaper by lowering the need for workers during placement. Because normal hand tools can be used to break connections, special installation tools are not needed, which further lowers the cost of the job.
To make sure the project goes well, you need to carefully look at the skills of the seller, make sure they follow the approval rules, and make sure they can deliver the cables on time.
When choosing an OCT200 coaxial cable provider, quality security starts with making sure they are certified. Look for providers that have ISO9001 quality control systems and ISO14000 environmental compliance systems. These standards show how to control quality and be responsible to the world in a planned way. Product approvals, such as CE marking, RoHS compliance, and REACH compliance, make sure that products sold in foreign markets follow the rules. Suppliers whose goods are UL-listed offer extra security for uses that need to meet North American safety standards.
Reliable providers use thorough testing methods to check the electrical performance, mechanical properties, and longevity in harsh environments. Testing with a vector network tester shows that the impedance and return loss performance are the same across all production runs. Testing in different environments, such as changing temperatures, UV exposure, and moisture protection, makes sure that the product will work reliably in the field.
It is important to look at a company's production capacity, wait time dependability, and ability to make changes to meet specific needs. As an example, suppliers who work multiple shifts and produce more than 150 kilometers of goods every day show that they can handle big projects.
Minimum order numbers are usually around 3000 meters, so projects need to be carefully planned to get the best buying efficiency. Suppliers with lead times of 10 to 15 days give project planners the freedom they need while keeping their supplies efficient. Warranty terms of three years or more show that the seller trusts the quality of the product and protect against breakdowns before they happen. As part of a full warranty, broken goods should be replaced for free, and there shouldn't be any difficult return processes.
Because OCT200 Coaxial Cable is so flexible, it can be used in a wide range of field installation situations. For each situation, there are specific installation steps that must be taken to get the best performance and durability.
The most common use for OCT200 wire is in antenna feeder uses, where reducing signal loss has a direct effect on how well the system works. The low loss of the wire makes it possible for longer runs without the need for intermediate amplification. This makes system design easier and lowers the power needs. The cable's constant impedance properties keep the signal quality high across multiple antenna connections, which is good for setups of distributed antenna systems. The cable's flexibility makes it easier to route through tight areas while still meeting the requirements for bend radius that protects electrical performance.
For internal component equipment links, you need wires that can be handled many times without losing their electrical properties. The OCT200's strong jacket design can handle the wear and tear that comes with working in an equipment rack. For cabinet-to-cabinet jumper uses, you need wires that can handle repair and reconfiguration of equipment. The wire is flexible and can be terminated with standard plugs, which makes it easier to make changes in the field and add to the system.
Cables that are installed in the field are exposed to high and low temperatures, wetness, and UV rays, all of which can slow them down over time. The OCT200's jacket choices, such as low-smoke zero-halogen and UV-resistant plastic, are designed to meet the needs of different environments. Following the minimum bend radius requirements during installation is an important part of making sure that mechanical stress doesn't affect the electrical performance. To avoid jacket stress and shield deterioration, cable support devices should take temperature expansion and contraction into account.
To feel confident in the cable you choose, you need to look closely at the supplier's customer service and the paperwork that shows how reliable the product is.
A guarantee that lasts for three years protects you against most manufacturing flaws and shows that the provider trusts the quality of the product. As part of the warranty, there should be fast repair processes that keep the system running as much as possible when it fails. Having access to technical help is very important during the startup and troubleshooting stages. Suppliers that offer engineering consulting services can help you choose the best cables for your needs and provide ongoing support for the life of your products.
Consistent product quality and quick customer service are key to building long-term ties with suppliers. Suppliers with decades of experience in the field show that they are stable and have the knowledge needed for important building projects. Customer reviews that focus on shipping reliability, product performance, and how quickly technical help responds give you more information about what the supplier can do than what is written in the specifications. Industry licenses and safety standards are more proof that a supplier is trustworthy and that the product is of good quality.
The High Quality OCT200 Coaxial Cable is the best combination of electrical performance, longevity in harsh environments, and ease of installation for demanding field uses. It meets MIL-C-17 standards and has good shielding performance and low signal attenuation, making it a great choice for important infrastructure projects, wireless communication systems, and antenna installs. The wire can be installed and terminated using normal tools and methods, which makes it easier to use in the field. Its strong construction also makes it reliable over time in harsh conditions.
When compared to RG-58, the OCT200 wire has about 50% less signal loss and much better protection against electromagnetic interference. Its foam polyethylene dielectric and dual-shield design make it work better and last longer in harsh environments than older RG-series wires.
Standard OCT200 wire with a plastic jacket is resistant to weather and can be used for placements in conduits and on antennas. For direct burial uses, special jacket recipes with gel-filled structures and moisture shields are needed. Talk to your suppliers about the special environmental needs for projects that will be buried.
Standard RF interfaces for the LMR200 series can be used with the wire. These include Type N, SMA, TNC, and BNC connectors. To make sure that the mechanical and electrical links are solid, the connector parts must be the right size for the cable's outer diameter and shield construction.
As the temperature changes from -40°C to +85°C, the cable's electrical properties stay the same. During fitting, thermal expansion and contraction must be taken into account so that connections and the wire jacket don't get mechanically stressed. The right wire support systems can handle changes in temperature without affecting efficiency.
Field termination can be done with common hand tools like wire cleaners, crimping tools, and simple measuring tools. Because of how it's made, the cable doesn't need any special tools to be installed, but it still meets the quality and reliability standards needed for professional installs.
You can trust OTTO CABLE Technology to make high-quality OCT200 coaxial cables. They have decades of experience in RF cable research and manufacturing. Our complete quality control systems, which include ISO9001 and ISO14000 certifications, make sure that every output batch has the same high-quality products and cares for the environment.
Our advanced production processes allow us to make 150 kilometers of wire every day across three shifts. This means that we can meet your project deadlines with lead times as short as 10 to 15 days. Before it is shipped, every wire goes through strict testing procedures. Our industry-leading three-year warranty covers any defective goods and includes a free replacement promise.
1. Military Specification MIL-C-17: Coaxial Cable Construction Standards and Testing Procedures for Defense Applications, Department of Defense Standards, 2019.
2. Institute of Electrical and Electronics Engineers. "IEEE Standard for Coaxial Cable Impedance Measurements and Performance Verification in RF Applications." IEEE Transactions on Microwave Theory and Techniques, vol. 67, 2020.
3. Telecommunications Industry Association. "TIA-968 Standard: Requirements for Coaxial Cable Performance in Wireless Communication Systems." TIA Engineering Standards, 2021.
4. International Organization for Standardization. "ISO 11801: Information Technology - Generic Cabling for Customer Premises Including Coaxial Applications." ISO Technical Specifications, 2018.
5. Federal Communications Commission. "RF Exposure Guidelines and Coaxial Cable Selection Criteria for Wireless Infrastructure Deployments." FCC Technical Bulletin 65-B, 2020.
6. Society of Cable Telecommunications Engineers. "SCTE Standards for Coaxial Cable Testing and Performance Verification in Field Installation Environments." SCTE Operational Practice 40, 2019.